A 1000 Takeoff
Two separate direct drives ensure greater accuracy and reduced maintenance!
On our newly designed A 1000 takeoff the belts of the upper and lower carriage are now controlled by two separate direct drives, so maintenance-intensive toothed belts are eliminated.
In addition, both the upper and lower carriage are movable, which ensures a stable centre and thus greater accuracy.
Standard configuration:
- Synchronous gap adjustment
(for constant product centring) - Movable upper and lower carriage
to protect the belts - Takeoff belts in the familiar Bellaform configuration
- The products are guided by side rollers
The roller spacing can be adjusted via a hand wheel on the roller guide. - Mechanical adjustment
the bandgap (spindle/crank) - Individually driven belts
via 2 directly installed servo motor - Direct drive without toothed belt
- Intermal protective housing
optical (and mechanical) division of the belt area
Technical details:
Drive power, servo motor | 2 x 1,5 kW |
Belt width | 80 mm |
Belt gap | 0 – 60 mm |
Contact lenght | 1000 m |
Maximum takeoff speed | 30 - 50 m/min |
Length x Width x Height [mm] | 1 420 x 710 x 2 000 |
Weight | 840 kg |
Bellaform takeoffs offer accurate speed control and thanks to a servo drive always run at a constant takeoff speed – even when your plant is running at full capacity.
Takeoff options:
- Contact pressure of the belts –
automatic setup from the product list (in conjunction with BELLEX) - Belt gap measurement
EVERYTHING FROM A SINGLE SOURCE
Thanks to our integration into the Pütz Group and the resulting synergy effects, we are able to offer you not just machines and systems for plastic processing but also the appropriate test technology to test surfaces for dimensional accuracy.